Background Operations - Kenwood TK-8302U Instruction Manual

h A
orn lert
The Horn Alert function can only be used with an optional KAP-2 unit.
Press the key programmed as Horn Alert to toggle the Horn Alert function ON or
OFF.
• "HA" appears on the display while Horn Alert is activated.
t - t
ime out imer
The Time-out Timer is used to prevent you from using a channel for an extended
duration. If you continuously transmit for a preset time, the transceiver will stop
transmitting and an alert tone will sound. Release the PTT switch.
A p
uxiliAry ort
Press the key programmed as AUX to activate the auxiliary port. The auxiliary
port is used with optional boards.
d b
iSplAy rightneSS
You can toggle the display brightness between high and low by pressing the key
programmed as Display Brightness.
d Z c
irect one
Press the key programmed as Direct Zone Channel to immediately select the
lowest channel of the lowest zone.
b c
uSy hAnnel
If BCL is set up by your dealer, you will be unable to transmit if the channel is
already in use. Use a different channel or wait until the channel becomes free.
ptt id
PTT ID is the transceiver unique ID code which is sent each time the PTT switch
is pressed and/or released.
c
ompAnder
If programmed by your dealer for a channel, the compander will remove
excessive noise from transmitted signals, to provide higher clarity of signals.
V A
oice nnouncement
When changing the channel, an audio voice will announce the new channel.
2

BACKGROUND OPERATIONS

(tot)
hAnnel
l (bcl)
ockout