CNET CWP-854 User Manual page 15

Authentication Type: There are seven type of authentication modes: Open, Shared, LEAP,
WPA, WPA-PSK, WPA2 and WPA2-PSK system.
A. LEAP
Light Extensible Authentication Protocol. It is an EAP authentication type used primarily
in Cisco Aironet WLANs. It encrypts data transmissions using dynamically generated WEP
keys, and supports mutual authentication.
1. Enter Identity
2. Enter Password
3. Click "OK" to save the profile.
B. Open System or Shared Key
1. Select Authentication type: Open System or Shared Key.
2. Select Encrytion: WEP
3. Select the key number that will be used
4. Enter the WEP key: There are several formats to enter the keys.
4. Click "Use 802.1x", if you want to use it. Refer to section "4- 802.1x Setting".
5. Click "OK" to save the profile. Please see the Fig 5-8.
Fig 5-7
1. Hexadecimal、64bits：10 Hex characters.
2. Hexadecimal、128bits：32Hex characters.
3. ASCII、40bits：5 ASCII characters.
4. ASCII、128bits：13 ASCII characters.