Searching For Bluetooth - LG CineBeam PF1000UG Owner's Manual

Searching for bluetooth devices and connecting
Go to
Device to search for nearby Bluetooth audio devices and then connect
any detected devices to the projector. (If the device name is longer than 20
characters, only the first 20 will be displayed.)
1
Set the Bluetooth device to pairing mode and then select Search
Device.
• Select Stop searching to view the devices detected so far.
• If the device has not been detected, check that the device is powered on
and in pairing mode.
•
The time it takes to search for devices may vary according to the signal
strength and the number of devices.
2
When the search is complete, you can select a Bluetooth device and
connect to it.
• You can stop the connection process immediately by selecting Stop
searching.
• The time it takes to connect to a device may vary according to the signal
strength and the number of devices.
Search Device
List
Please wait.
Stop searching
→ AUDIO → Sound Out → Bluetooth → Search
AUDIO
Sound Mode
•
• Sound Effect
• Auto Volume
• Sound Out
• Sound Out
• AV Sync. Adjust
Searching...
Close
ꔂ Move ꔉ OK
: Standard
: Off
: Bluetooth
:Bluetooth
: Off
Search Device
List
HBS-700
Press OK(ꔉ) to connect the device.
Re-search
37
Search complete
Close