Installation; Base Installation; Wall Mounting - Telefunken TF-LED24S01T2 Instruction Manual

.
product. If the liquid is spilt, it may cause the
fire, electric shock or breakdown.
• Do not install it at the place on the strong
magnetic field or current field. It may cause
break down. This equipment may be observed
deterioration of the picture by electromagnetic
radiation in electromagnetic environment.
• Fasten the wheel of the product or shelf
with wheels when installing this product. If it
moves or is tipped over, it may be damaged.
• Do not place any fire source such as
candlelight close to this product or place it on
this product. If it is tipped over or fallen down, it
may cause damage or fire.
• Do not place the unit into closed space
of TV for better ventilation; it can reduce the
product lifetime. Keep a space at least 10 cm
at above, left, and right of the TV.
• Please place all the signal cords behind of
rear panel.
• Do not overexert or touch the panel when
you convey the product. Do not transfer the
LED TV up or down display direction.
• Do not transport it with the power cord
or the connection cable connected. If you
move this product with the power cord or the
connection cable connected, damaged power
cord, connection cable or connection terminal
may cause fire, electric shock or breakdown.
• 2 persons or more shall transport the
device, which is heavier than 18 kg. If you drop
or tip over the device, it may damage it.
• The temperature of the product's body
becomes a little higher after a long period use.
This phenomenon indicates that heat
exchange in normal working mode, thus please
do not let children or anyone who is sensitive
of temperature to touch.
All images provided herein are schematic
drawings and may differ from real objects.
WARNING
In order to avoid damage, make sure
to secure the
according to
instruction.
unit on the wall
the wall mounting
Before you start

Installation

Wall mounting

For wall mounting the back panel of this unit is
equipped with a VESA slot. A 200*100 mm
VESA wall-mount bracket should be used for
wall mounting. The wall-mounting bracket is not
included and should be acquired separately.
Manufacturer is not responsible for improper
mounting resulting in a damage to the unit.
Stand installation
Cover a flat stable surface with a soft cloth.
Place the TV unit facedown on the cloth. Insert
double support legs and fix them with 4
screws as shown below.
Wall or ceiling mounting implements
must be durable and sufficient enough to
support the weight of the unit.
4