ELNA 792D Instruction Book page 42

HOW TO USE THE BLIND STITCH FOOT
Sting the fold merely
Wrong side of fabric
Wrong side
of fabric
42
1
2
Right needle
Fold
Fig.1
Fig.2
Fig.3
Right side
of fabric
Fig.4
1 Adjusting screw
2 Cloth guide
3 Thumb screw
4 Groove
1. First, remove the left needle. Next, remove the foot on the
sewing machine and attach the blind stitch foot.
2. Adjust the feed dial to 4-5.
(Adjust according to the kind of cloth.)
3. Fold the cloth as in Fig. 1 and iron lightly.
4. Set the position of the cloth guide, turning the adjusting screw
until the needle just pierces the fold of the cloth
(Fig. 1, Fig. 2).
5. Make the fold go along the cloth guide without letting the
needle miss it (Fig. 3).
6. Open the cloth and iron (Fig. 4).