Biostar TForce4 SLI User Manual

Biostar T-Series
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular
installation.
The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any
purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor's approval in writing.
The content of this user's manual is subject to be changed without notice and we will not be responsible for any mistakes found in this user's manual. All the brand and product
names are trademarks of their respective companies.
P C
ACKAGE HECKLIST
FDD Cable x 1
HDD Cable x 2
SPDIF Cable x 1
User's Manual x 1
Overclock Guide x 1
Serial ATA Cable x 4
BRI-2 SLI Bridge x 1
Retention Bracket x 1
Fully Setup Driver CD x 1
SATA RAID Driver Disk x 1
Rear I/O Panel for ATX Case x 1
SLI-NF4 Selector Card x 1 (pre-installed)
USB 2.0 Cable x 1 (optional)
IEEE 1394A Cable x 1 (optional)
Serial ATA Power Switch Cable x 4 (optional)
Free gift
i
TForce4 SLI
User's Manual