This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular
installation.
The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any
purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor's approval in writing.
The content of this user's manual is subject to be changed without notice and we will not be responsible for any mistakes found in this user's manual. All the brand and product
names are trademarks of their respective companies.
Page 1
Biostar T-Series FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Biostar T-Series ACKAGE HECKLIST CHAPTER 1: INTRODUCTION ...1 ... 1 OTHERBOARD EATURES ... 2 AYOUT AND OMPONENTS CHAPTER 2: HARDWARE INSTALLATIONS ...3 CPU A ... 3 SSEMBLY A. Central Processing Unit (CPU) ...3 B. About FAN Headers...3 ... 4 YSTEM EMORY A.
Biostar T-Series Chapter 1: Introduction 1.1 M OTHERBOARD EATURES Supports LGA 775. Supports Intel Pentium 4 processor and Celeron D. Supports Dual Core CPU Supports Pentium D Supports Pentium EE Front Side Bus at the following frequency ranges: 533MT/s (133MHzCore Clock) ...
Biostar T-Series Chapter 2: Hardware Installations 2.1 CPU A SSEMBLY A. Central Processing Unit (CPU) Special Notice: Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be damaged.
Hard Disk Connectors: IDE1/IDE2 The motherboard has two 32-bit Enhanced PCI IDE Controllers that provide PIO Mode 0~5, Bus Master, and Ultra DMA 33/66/100/133 functionality. It has two HDD connectors IDE1 (primary) and IDE2 (secondary). The IDE connectors can connect a master and a slave drive, so you can connect up to four hard disk drives.
Biostar T-Series Peripheral Component Interconnect Slots: PCI1~PCI4 This motherboard is equipped with 4 standard PCI slots. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits. PCI-Express Slots: PCI-Ex16-1/PCI-Ex1_1/PCI-Ex1_2 PCI-Ex16-1: PCI Express 1.0a compliant.
Page 8
Biostar T-Series ATX Power Source Connector: JATXPWR2 By connecting JATXPWR2, it will provide +12V to CPU power circuit. Power Source Header for PS/2 Keyboard/Mouse: JKBV1 Pin 1-2 Close: +5V for PS/2 keyboard and mouse. Pin 2-3 Close: PS/2 keyboard and mouse are powered with +5V standby voltage.
Page 9
Biostar T-Series CD-ROM Audio-in Connector: JCDIN1 This connector allows user to connect the audio source from a variety of devices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV tuner card etc.. Headers for USB Ports at Front Panel: JUSB1~JUSB2 This connector allows user to connect additional USB cables at PC front panel, and also can be connected with internal USB devices, like USB card reader.
Page 10
Connector Ground (Optional) IRTX IRRX Serial ATA Connectors: JSATA1~JSATA4 With the SATA Controller provided in the chipset, this motherboard supports 4 channel SATA II connectors. It satisfies the SATA 2.0 spec with transfer rate of 3.0 Gb/s. IR(Optional) On/Off Function...
Page 11
Biostar T-Series Clear CMOS Header: JCMOS1 By placing the jumper on pin 2-3, it allows user to restore the BIOS safe setting and the CMOS data, please carefully follow the procedures to avoid damaging the motherboard. ※ ※ ※ ※...
Page 12
Biostar T-Series On-Board LED Indicators There are 4 LED indicators on the motherboard to show system status. LED_D1 and LED_D2: These 2 LED indicate system power on diagnostics. Please refer to the table below for different messages: LED_D2 LED_D1 Message...
Biostar T-Series Chapter 3: NVIDIA RAID Functions PERATION YSTEM Supports Windows XP Home/Professional Edition, and Windows 2000 Professional. RRAYS NVRAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications.
Page 14
Biostar T-Series RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array.
Page 15
Biostar T-Series RAID 5: RAID 5 stripes both data and parity information across three or more drives. It writes data and parity blocks across all the drives in the array. Fault tolerance is maintained by ensuring that the parity information for any given block of data is placed on a different drive from those used to store the data itself.
Make a bootable floppy disk. Download the Flash Utility “AWDFLASH.exe” from the Biostar website: www.biostar.com.tw Confirm motherboard model and download the respective BIOS from Biostar website. Copy “AWDFLASH.exe” and respective BIOS onto floppy disk. Insert the bootable disk into floppy drive and press Enter.
Biostar T-Series ROUBLESHOOTING Problem No power to the system at all Make sure power cable is securely Power light don’t illuminate, fan plugged in. inside power supply does not turn Replace cable. Contact technical support. Indicator light on keyboard does not turn on.
Biostar T-Series German Unterstützt LGA 775. Unterstützt Intel Pentium 4-Prozessoren und Celeron D. Unterstützt Dual-Core-CPU Unterstützt Pentium D Unterstützt Pentium EE Unterstützt die folgenden Front Side Bus-Frequenzen: 533MT/s (133MHz Kerntakt) 800MT/s (200MHz Kerntakt) 1066MT/s (266MHz Kerntakt) Unterstützt die Hyper-Threading Technology (HT) Unterstützt die Execute Disable Bit Technology (XD).
Biostar T-Series French Processeur Prise en charge de LGA 775. Prise en charge des processeurs Intel Pentium 4 et Celeron D. Prise en charge CPU Dual Core. Prise en charge de Pentium D Prise en charge de Pentium EE Bus front-side aux fréquences suivantes : 533MT/s (Horloge cœur 133MHz)
Biostar T-Series Italian Supporto LGA 775. Supporto processore Intel Pentium 4 ed Celeron D. CPU Dual Core. Supporto Pentium D Supporto Pentium EE FSB (Front Side Bus) alle seguenti portate di frequenza: 533MT/s (133MHz Core Clock) 800MT/s (200MHz Core Clock) ...
Biostar T-Series Spanish Procesador Compatible con LGA 775. Compatible con el procesador Intel Pentium 4 y Celeron D. Admite procesador de núcleo dual. Compatible con Pentium D Compatible con Pentium EE FSB (Front Side Bus) en los siguientes intervalos de frecuencia: 533 MT/s (reloj principal a 133 MHz) ...
Biostar T-Series Portuguese Suporta o socket LGA 775. Suporta um processador Intel Pentium 4 e Celeron D. Suporta uma CPU dual core. Suporta um Pentium D Suporta um Pentium EE FSB (Front Side Bus) com as seguintes frequências: 533 MT/s (133 MHz) 800 MT/s (200 MHz) ...
Biostar T-Series Russian Процессор Поддерживает LGA 775. Поддерживает процессоры Intel Pentium 4 и Celeron D. Поддержка двуядерных процессоров Поддерживает Pentium D Поддерживает Pentium EE Поддерживаются следующие частоты системной шины: 533 МГц (133 МГц базовая частота) 800 МГц (200 МГц базовая частота) ...