User Set Mode - Vertex Standard VX-P870 Series Operating Manual

The VX-P820/-P870 Series includes a "User Set
(Menu)" Mode which allows the user to define or
configure various settings, such as Beep On/Off,
Squelch, LCD contrast, etc. To activate the "User Set
(Menu)" Mode:
Press the assigned programmable key for the
"SET" function to enter the "User Set Mode."
Select the User Set Mode Item you want change
using the CH selector knob.
Press the MONITOR/LAMP button to select the
status of the selected item.
Press PTT switch to exit to normal operation.
VX-P820/-P870 S
ERIES
U
SER
O M
PERATING ANUAL
S M
ET ODE
D D
ISPLAY ESCRIPTION
1 SQL Select the Squelch Threshold Level
2 SCN List Select the Scan List "User" or "Dealer"
3 BEEP Set the Beep On/Off
4 BELL Set the Bell On/Off
(Bell engaged by sub-audible CTCSS/DCS)
5 Lighting Set the BUSY/TX LED On/Off
6 Lock Set the Lock function to be Locked
(Key/PTT/Key+PTT)
7 Group Set the Operation Group
8 SCAN Set the Scan status
(same function as Scan key)
9 DW Set the Dual Watch status
(same function as DW key)
10 TA Set the Talk Around status
(same function as TA key)
11 AF MinVR Set the Minimum Volume level
12 Beep VR Set the Beep volume level
13 Contrast Set the LCD contrast
14 Pitch Not available at this time
15 RSSI Beep Enables/Disables the RSSI beep.
on: Enables the disabling the RSSI beep.
off: Disables the disabling the RSSI beep.
25