Table of Contents
Advertisement
Floor Mounting
Rear position
Front position
Wall Mounting
5. Using two #12 x 1⁵⁄₈" Phillips-head screws provided, mount
6. Move range close enough to opening to allow for final
7. Move range into its final location, making sure rear leveling
Diagonal (2 options)
8. Move range forward onto shipping base, cardboard or
anti-tip bracket to the wall or floor.
electrical connections. Remove shipping base, cardboard or
hardboard from under range.
leg slides into anti-tip bracket.
hardboard to continue installing the range using the following
installation instructions.
7
Advertisement
Table of Contents
