Icom A120BE Full Manual page 35

9
SPECIFICATIONS AND OPTIONS
Specifications (Continued)
D Receiver
• Receive system:
• Intermediate frequencies:
• Sensitivity:
IC-A120
IC-A120E
• Squelch sensitivity:
IC-A120
IC-A120E
• Spurious response rejection ratio:
IC-A120
IC-A120E
• Audio output power:
External speaker
Side tone
All stated specifications are subject to change without notice or obligation.
Options
HM-217
speaker micrOphOne
The speaker microphone with [∫]/[√] keys and
[P1]/[P2] keys.
UP/DOWN KEYS
[∫]/[√]
Push to select the
channel.
P1 KEY [P1]
Push to select the
Priority channel.
You can customize the key assignment in the Menu mode (p. 7-5).
VS-3
Bluetooth ® headset
The Bluetooth ® headset with a [PTT] switch.
UT-133A
Bluetooth ® unit
OPC-871A
headset adapter
The adapter to connect a standard headset.
Double conversion superheterodyne
1st 38.85 MHz
2nd 450 kHz
Less than 1 μV (pd) (at 6 dB S/N)
Less than –101 dBm (12 dB SINAD with CCITT)
Less than 0.35 μV (pd)
Less than –116 dBm
More than 5 mV (pd)
More than 70 dB
More than 10 W
( at 13.75 V DC with 8 Ω load 60% mod, 10% distortion)
More than 100 mW
( at 13.75 V DC with 500 Ω load 60% mod, 10% distortion)
P2 KEY [P2]
Push to turn the
Key Lock function
ON or OFF.
9-3
OPC-478UC
clOning cable
The cable to connect a PC and the OPC-592
when you control the transceiver with
cable adapter
the CI-V commands (p. 10-2).
OPC-592
clOning cable adapter
The cable adapter to connect the transceiver and the
OPC-478UC
clOning cable
transceiver with the CI-V commands (p. 10-2).
clOning
when you control the