Icom A120BE Full Manual page 30

8
CONNECTION AND INSTALLATION
Rear panel connection
Antenna
q
R WARNING! NEVER remove
the fuse holders from the DC
power cable.
Red
12 V or 24 V*
Battery
* The transceiver automatically
adjusts to the input voltage.
q ANTENNA CONNECTOR
Connect an antenna cable.
w HEADSET ADAPTER CONNECTOR
Connect an optional OPC-871A
Ask your dealer for details.
t
Black
NOTE: Use the terminals as shown
below for the cable connections.
Solder
Crimp
.
headset adapter
w
r
r EXTERNAL SPEAKER JACK
C onnect an 8 Ω external speaker
t DC POWER RECEPTACLE
Connects to a 12 V or 24 V*
DC power source.
Pay attention to polarities.
R WARNING! NEVER connect the
transceiver to a power source of more
than 31.5 V DC. This could damage
the transceiver.
8-2
e MICROPHONE HANGER
Connect the supplied
microphone hanger to the
vehicle's ground to use the
microphone ON/OFF hook
functions.
Microphone
e
Microphone
hanger cable