Portrait Viewing Installation (Optional) - BenQ FP92G+ User Manual

Portrait Viewing Installation (Optional)

Your LCD monitor also supports portrait viewing orientation, allowing you to fit your specific
desktop application without needing to scroll down.
Before rotating the display with a portrait viewing orientation, please install the Pivot software
from the enclosed CD first.
To Install the Pivot software:
1. Execute "START_PIVOT.EXE" from the folder named "Pivot" on the provided CD.
2. Follow the on-screen instructions to install the software.
3. After restarting your system, you will see a Pivot Software Control icon,
the system tray. Click on the icon and choose "Rotate 90 degrees",
To cancel this action, choose "Rotate 0 degree",
4. Turn the power off and keep following the steps below.
To rotate the display:
1. Hold the monitor along the bottom and move it
upwards to the maximum extendable position..
The stand should be vertically extended to allow
the monitor to rotate from landscape to portrait
mode.
2. Tilt the display backward till it reaches the first
lock.
To avoid the edge of the LCD display hitting the
monitor base surface while it is being rotated, do
tilt the display as instructed.
9 How to install your monitor hardware
, to pivot the display.
.
, appearing in