Table of Contents
Advertisement
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power point
and turn it on.
Turn on the monitor by pressing the power button on the
front of the monitor.
Turn on the computer too, and follow the instructions in
Section 4:
Getting the most from your BenQ monitor
install the monitor software.
The power point and plug shown are indicative only,
and may differ from that used in your region.
Viewing Angle Adjustment
You may position the screen to the desired angle with -5° to +20° monitor tilt, 342° monitor
swivel, and 72 mm monitor height.
to
171
171
How to install your monitor hardware
8
Advertisement
Table of Contents
