Volume; About; Gps Status - Binatone X430 User Manual

Volume

Tap to change the volume of the unit. Use the Left/Right arrows to change the level,
the current level will be indicated on the bar.
Tapping Default will reset the volume back to the default state.
Tapping cancel will exit without saving any of the changes you have made.
Tapping Done will save any changes and exit.

About

Displays information about the software version which you are using. Tap Close to
return to the settings menu.
Note: In order for the changes to the settings to be saved, you must exit the
navigational software correctly by pressing on the exit icon shown on the main menu
screen. (See page 16)

GPS Status

This screen can be brought up from
several different points in the software, by
either tapping
from the map screen. It can also be
found as an option in the Navigation
Options menu.
The screen shows you information about the date/time, your current position in
longitude and latitude as well as your height above sea level. Your current speed
and the direction you are facing.
Along with this information you will find information about the satellites you are
receiving signals from. The green bars show signals which are locked, the orange
bars show the signals which have been found but are not locked to. Next to these
bars you will see a number this number relates to the number of the satellite for
which the signal is coming from.
Tap Close to return to the Main Menu.
Note; If you only have 3 locked satellite signals then you only have a 2D fix
and certain information will not be available. In order to navigate you need at
least 4 locked satellite signals which will give a 3D fix. This is clearly indicated
at the bottom of the screen by either the word Invalid or valid
37
PDF 文件使用 "pdfFactory Pro" 试用版本创建
in the main menu or
Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate)
www.fineprint.cn
NAVIGATION MENU