Table of Contents
Advertisement
www.ti.com
PS#1
9. Turn on the computer. Open the bq27531 evaluation software. The main window of the software is
shown in
Figure 9
4.2
Software Installation
Find the latest software version at http://www.ti.com/tool/bqStudio. Use the following steps to install
Battery Management Studio:
4.2.1
Using EV2300
1. Ensure that the EV2300 is not connected to the PC through a USB cable before starting this
procedure.
2. Select the Tool and Software tab in the product folder.
3. Under the Software section, click on Battery Management Studio (bqStudio) Software Suite.
4. Click the Download button to download the software.
5. Download software to hard drive.
6. Double-click the software executable and follow all instructions and prompts.
SLUUA90A – April 2013 – Revised July 2016
Submit Documentation Feedback
Figure 8. Test Setup for bq27531EVM (PWR216)
(DataRAM Screen).
bq27531EVM With bq27531 Battery Management Unit Impedance Track™
Fuel Gauge and bq24192 4.5-A, Switch-Mode Battery Charger for Single-Cell
Copyright © 2013–2016, Texas Instruments Incorporated
EVM Hardware and Software Setup
Elec Load/
Resistor Box
EV2300
15
Applications
Advertisement
Table of Contents
