Hotkey Summary Table - ATEN CS-74M User Manual

Skip Mode:
This feature allows you to skip from the currently active Port to
the Previous or Next one with a single keystroke. In contrast to
Auto Scan Mode (which switches Ports at a fixed interval), you
can dwell on a particular port for as long or as little as you like.
To activate Skip Mode:
1. Invoke Hotkey Mode (see p. 9)
2. Press [ ← ] to skip from the current port to the port that
comes before it (3 to 2; 2 to 1, etc.).
3. Press [ → ] to skip from the current port to the port that comes
after it (1 to 2; 2 to 3, etc.).
Note: 1. Skip Mode remains in effect until you exit it. You can
use [ ← ] and [ → ] as often as you like. Ordinary
keyboard and mouse functions are suspended - only
[ ← ] and [ → ] can be input. You must exit Skip Mode
in order to regain normal control of the console.
2. Pressing [Esc] or [Spacebar] exits both Skip Mode
and Hotkey Mode.

Hotkey Summary Table

After invoking Hotkey Mode:
Combination
[Port ID Number] Switches access to the computer that corresponds to that
Port ID.
[A] Invokes Auto Scan Mode
[ ← ]
Switches access from the current port to the previous
port.
[ → ]
Switches access from the current port to the next port.
[Esc] or [Spacebar] Exits Hotkey, Auto Scan, and Skip Modes.
2003-08-01
Function
- 11 -