Attaching The Mounting Plate - Miele SMUL0 Operating Instructions Manual

Attaching the mounting plate

2 plugs and 2 T20 TORX screws are
supplied for attaching the mounting
plate to the wall.
You will also need a battery-operated
screwdriver or a drill (with a drilling dia-
meter of 6 mm).
Depending on how your vacuum
cleaner is configured, select a distance
of 45 cm or 98 cm between the bottom
edge of the mounting plate and the
floor.
Be careful not to damage any cables
laid in the wall.
 Attach the mounting plate to the wall.
Connecting the accessories holder (if
required)
An accessories holder is supplied for
storing the 3-piece accessory set on
the wall bracket (see "Using the ac-
cessories supplied").
 Push the accessories holder onto the
wall bracket as far as it will go.
21