Table of Contents
Advertisement
The following item appears only when you installed an Intel
4 or later CPU that supports the Enhanced Intel SpeedStep
Technology (EIST).
Intel(R) SpeedStep Technology [Automatic]
Allows you to use the Enhanced Intel
to [Enabled], you can adjust the system power settings in the operating
system to use the EIST feature. Set this item to [Disabled] if you do not
want to use the EIST. Configuration options: [Automatic] [Disabled]
Intel(R) C-STATE Technology [Enabled]
Allows you to enable or disable the C-STATE technology. Configuration
options: [Enabled] [Disabled]
5.4.4
Chipset
The Chipset menu allows you to change the advanced chipset settings.
Select an item then press <Enter> to display the sub-menu.
Chipset Settings
WARNING: Setting wrong values in below sections
may cause the system to
NorthBridge Configuration
NorthBridge Configuration
North Bridge chipset Configuration
Memory Remap Feature
Configure DRAM Timing by SPD
Initiate Graphic Adapter
Initiate Graphic Mode Select
DVMT Mode Select
DVMT/FIXED Memory
PEG Port Configuration
PEG Force x1
5-22
SpeedStep
®
malfunction.
[Disabled]
[Enabled]
[PEG/PCI]
[Enabled, 8MB]
[Fixed Mode]
[128MB]
[Disabled]
Pentium
®
®
Technology. When set
®
Chapter 5: BIOS setup
®
Advertisement
Table of Contents
