Adding A New User Password; Deleting The User Passwords; Changing The User Password - Apricorn Aegis Padlock A25-PL128 250GB User Manual

Adding a new User Password

You can add a new User Password by doing the following:
1.
Enter the Admin Mode (refer to page 9 for details).
2.
Press and hold
3.
Enter a User Password and press
of 16 digits) The indicator light flashes green three times.
4.
Re-enter the new User Password and press
solid green for two seconds, the User Password was added successfully.

Deleting the User Passwords

You can delete all User Passwords by doing the following:
1.
Enter the Admin Mode (refer to page 9 for details).
2.
Press and hold 7 + 8 +
intermittently. After the indicator light flashes green three times and then blue
intermittently.
3.
Press and hold 7 + 8 +
light goes on solid green for two seconds and then back to solid blue, this
indicates that the User Passwords were deleted successfully.

Changing the User Password

You can change the User Password by doing the following:
1.
Enter User Mode (refer to page 8 for details).
2.
Press and hold
3.
Enter your old password and press
then change to flashing blue.
4.
Enter the new password and press
6 digits and a maximum of 16 digits). The indicator light will flash green three
times.
5.
Re-enter the new User Password and press
green for two seconds and the User Password is changed successfully.
+ 1 until the indicator light flashes blue intermittently.
for five seconds until the indicator light flashes blue
a second time for five seconds until the indicator
+ 1 until the indicator light flashes red.
www.apricorn.com
(a minimum of 6 digits and a maximum
. If the indicator light stays
. The indicator light will turn green,
(The Password must be a minimum of
. The indicator light stays solid
11