Parts And Functions - Panasonic WV-X4573L Basic Information

Parts and functions

 Cables
X4573LM S4551LM
{1} M12 Network cable
X4573L S4551L
{1} RJ45 Network cable
{1}
X4573L S4551L
Connect an Ethernet cable (category 5e or better, straight, 4 pairs (8 pins)) to the RJ45 Network cable
or the M12 Network cable.
IMPORTANT:
• Use all 4 pairs (8 pins) of the Ethernet cable.
• The maximum cable length is 100 m {328 feet}.
• Make sure that the PoE device in use is compliant with IEEE802.3af standard.
• When connecting both the 12 V DC power supply and the PoE device for power supply, 12 V
DC will be used for power supply.
• When the Ethernet cable is disconnected once, reconnect the cable after around 2 seconds.
When the cable is quickly reconnected, the power may not be supplied from the PoE device.
M12 connector
4 1
3 2
Female
{3} EXT I/O cable
Power supply cable
{2}
RJ45 Network cable /
Pin No. Signal Name Wire Color
1
2
3
1 4
4
2 3
Male
Ethernet cable (category 5e or
better, straight, 4 pairs (8 pins))
{3} 4P alarm cable (accessory)
2P power cable (accessory)
{2}
{4}
{5} Audio output cable (black)
X4573LM S4551LM
9
TXD+ White·Green
RXD+ White·Orange
TXD- Green
RXD- Orange
12 V DC (red)
GND (black)
Audio input cable (white)
M12 Network cable