Alpine TME-M770 Owner's Manual page 19

< When not using a face panel >
1) Attaching an inner case to the headrest
Cut the headrest cloth about 10 mm to the
inside of the inner case mounting position.
After inserting in the headrest, anchor
these hooks in the cushion/urethane
foam to keep the inner case in place.
2) Attaching a monitor to the inner case
Monitor
3) Detaching the monitor
Monitor lock release tool
Inner case mounting position
Inner case
Cushion (170 x 10 x 3)
* Cut according to the opening
of the inner case and attach to
the inner front of the inner
case.
Inner case
Machine screw (M3 x 6)
Lock
Lock case
Headrest
Monitor
Headrest
Column
Bind wire
Cushion (170 x 10 x 3)
Inner case
Headrest
Lock
Headrest
cloth
Inner case
Cushion
Monitor
(170 x 10 x 8)
<Inner structure of headrest after installation>
Release the lock by inserting the tool, then draw the
monitor out and remove it.
• Insert the tool with the face panel removed.
• If the headrest cloth is stuck between the inner case
and monitor, pull out the headrest cloth, then insert
the tool to release the lock.
FR
ES
DE
IT
SE
17
-EN