Mac Filtering - D-Link P.DG A4001N A-000-1A1-AE User Manual

Appendix A – Troubleshooting
Destination IP Enter the end IP address which you are creating the filter rule.
address[/prefix
length]
Destination Port The Destination Port is the TCP/UDP port on either the LAN or WAN depending on if you are configuring an Outbound or
(port or port:port) Inbound Filter rule.
TheMAC Filtering button appears when configuring WAN interface inBridge.

MAC Filtering

This window allows you to create a filter rule of MAC.
Click change default policy to change the mode of policy.
MAC Filtering is only effective on ATM PVCs configured in Bridge mode.
FORWARDED means that all MAC layer frames will be
except those matching with any of the specified rules in the following
table. BLOCKED means that all MAC layer frames will be BLOCKED
except those matching with any of the specified rules in the following
table.
MAC Filtering Policy For Each Interface:
WARNING: Changing from one policy to another of an interface will
cause all defined rules for that interface to be REMOVED
AUTOMATICALLY! You will need to create new rules for the new
policy.
If you are setting up the MAC filtering, click the Add button.
If you are setting up the MAC filtering, click the Add button.
4Port 2x2 wireless ADSL modem User Manual
MAC Filtering
FORWARDED
53