NETGEAR WGR614 v7 Setup Manual page 12

Router Setup Manual
f. Securely insert the Ethernet cable from your modem into the Internet port of the router (3).
3
Figure 1-4
g. Securely insert the blue cable (4) that came with your router into a LAN port on the router
such as LAN port 1 (5), and the other end into the Ethernet port of your computer (6).
Figure 1-5
Your network cables are connected and you are ready to start your network.
2. Start your network in the correct sequence
Warning: Failure to start or restart your network in the correct sequence could
a. First, plug in and turn on the cable or DSL modem. Wait 2 minutes.
b. Now, plug the power cord into your router and into a power outlet. Wait 1 minute.
1-6
6
4
5
prevent you from accessing the Internet.
v1.0, 2006-01-17
Connecting the Router to the Internet