Installation Procedure; Install The Hardware - Advantek Networks AWN-MIMO-54RA User Manual

2. Installation Procedure

Note: If you have installed the Wireless Adapter LAN driver & utility before, please
uninstall the old version first.

2.1 Install the Hardware

[For Wireless CardBus Adapter]
STEP1: To use the Wireless Cardbus Adapter with a computing device, the Wireless Cardbus
Adapter must be equipped with an internal or external PCMCIA Card Type II or Type III
slot.
STEP2: Please firmly insert the Wireless Cardbus Adapter into an available PCMCIA Card
slot. PCMCIA Card slot is located on one side of the Laptop PC.
[For Wireless PCI Adapter]
STEP1: Turn off your computer and remove its cover
STEP2: Insert the PCI card to an available PCI slot firmly. Please refer to the illustration below:
6