MIMO 802.11g Wireless LAN Adapter Quick Installation Guide Model # AWN-MIMO-54RA...
Page 2
1. Install the Device STEP 1: Turn off your computer and remove its cover STEP 2: Insert the PCI card to an available PCI slot firmly. STEP 3: Secure this card to the rear of the computer chassis and put back the cover. STEP 4: Secure the antenna to antenna connector of the card.
Page 3
STEP 6: Please choose Optimize for performance mode to enable the Tx Burst mode for better performance. Or you can choose Optimize for WiFi mode to run in standard wireless network. STEP 7: Please wait for a while during the adapter is configuring your new software installation.
Page 4
STEP 8: When the adapter is installed properly, the configuration utility will be displayed automatically. STEP 9: Please restart your computer after the installation has finished. Choose Yes, I want to restart my computer now and click Finish button. The Configuration Utility appears as an icon on the system tray of Windows while the adapter is running.