Setup Projection Menu; Setup Screen Type Menu; Setup Lamp Settings Menu; Setup Filter Settings Menu - Optoma W318STe User Manual

USING THE PROJECTOR
Setup menu

Setup projection menu

Projection
Select the preferred projection between front, rear, ceiling-top, and rear-top.

Setup screen type menu

Screen Type (for WXGA model only)
Choose the screen type from 16:9 and 16:10.

Setup lamp settings menu

Lamp Reminder
Choose this function to show or to hide the warning message when the changing lamp message is displayed. The
message will appear 30 hours before suggested replacement of lamp.
Lamp Reset
Resets the lamp hour counter after replacing the lamp.

Setup filter settings menu

Optional Filter Installed
Set the warning message setting.
‡ Yese: Display warning message after 500 hours of use.
Notee:
"Filter Usage Hours / Filter Reminder / Filter Reset" will only appear when "Optional Filter Installed" is "Yes".
‡ Noe: Turn off warning message.
Filter Usage Hours
Display the filter time.
Filter Reminder
Choose this function to show or hide the warning message when the changing filter message is displayed. The
available options include Off, 300hr, 500hr, 800hr, and 1000hr.
Filter Reset
Reset the dust filter counter after replacing or cleaning the dust filter.

Setup power settings menu

Direct Power On
Choose "On" to activate Direct Power mode. The projector will automatically power on when AC power is supplied,
without pressing the "Power" key on the projector keypad or on the remote control.
Signal Power On
Choose "On" to activate Signal Power mode. The projector will automatically power on when a signal is detected,
without pressing the "Power" key on the projector Keypad or on the remote control.
Notee:
‡ If the "Signal Power On" option is turned "On", the power consumption of the projector in standby
mode will be over 3W.
‡
Due to the ErP directive, this feature is not available on models found in EMEA.
43
English