LG GR-J35FTKHL Owner's Manual page 19

Right Door
<Type1>
If the door is too low, use the spanner type 1 to
rotate the door hinge bolt as shown below.
<Type2>
If the door is too low, lift the right door up and
insert use a pair of long nose pliers to insert
ring sheets until both doors are level.
<Type1>
Fridge door
Freezer door
<Type2>
Fridge door
Freezer door
Adjusting the Freezer Door
If the door of the appliance is not level, adjust
the difference in the height of appliance door
using the following method.
NOTE
• Because the hinge pin may fall out, do not
adjust the height of the appliance door more
than 5 cm.
*Reference
Spanner
1
Height difference
2
3
If it is impossible to adjust the height of the
appliance door through the above method, level
the door according to the following guide.
Keeper nut
Adjustment hinge pin
Loosen the keeper nut by rotating it
counterclockwise using a 19 mm spanner.
To loosen the nut
Adjust the difference in the height of the
appliance door by rotating the adjustment
hinge pin clockwise or counterclockwise
with an 8 mm spanner.
Up
Down
After adjusting the difference in the height
of the appliance door, fasten the keeper nut
by rotating it clockwise.
To tighten the nut
EN
19