LG M2380D Owner's Manual page 68

PICTURE CONTROL
Auto Configure (RGB [PC] mode only)
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image
is still not correct, your set is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, clock, and phase The displayed
image will be unstable for a few seconds while the auto configuration is in progress.
1. Using OSD
PICTURE
Screen
Screen
1
MENU
2
3
4
2. Using Auto Config. (Remocon)
This function is available for RGB signals only.
1
Press Auto Config.
Auto Config.
68
Move
OK
u
• Brightness 50
• Sharpness 70
• Colour 60
• Tint 0
• Col o ur T emperature W24
• Advanced Control
• Picture Reset
ꔋ
Select PICTURE.
Select Screen.
Select Auto Config.
Select Yes.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
Auto in progress
<1920 x 1080 Resolution>
SCREEN
Resolution
Auto Config.
➩
Position
Size
Phase
Reset
• If the position of the image is still not correct,
try Auto adjustment again.
• If picture needs to be adjusted again after
Auto adjustment in RGB (PC), you can adjust
the Posi tion, Size or Phase.
5
Run Auto Config.
change resolution 1920 x 1080
Move Prev.
s
To Set
Yes No
Auto in progress
For optimal display
<Others Resolution>