EXTERNAL EQUIPMENT SETUP
Connecting with an HDMI to DVI cable
1
Connect the DVI output of the PC to the HDMI/
DVI IN1 or HDMI/DVI IN2 jack on the Monitor set.
2
Connect the PC audio output to the AUDIO IN
(RGB/DVI) jack on the Monitor set.
3
Turn on the PC and the Monitor set.
4
Select HDMI 1 or HDMI 2 input source using the
INPUT button on the remote control.
!
NOTE
►If you want to use HDMI-PC mode, you must set the input label to the pc mode.
28
►Connect the signal input cable and tighten it by turning
the screws clockwise.
1
2