Table of Contents
Advertisement
Setup the network connection
Set up the network connection to enable the network service functions such as VIERA Connect, etc.
(p. 17, 67).
•
To set up the wireless connection, the Wireless LAN Adaptor is required.
•
Please note that this TV does not support wireless public access points.
•
Ensure the network connections and network environment are completed before starting setup.
Connect the LAN cable or Wireless LAN Adaptor
1
To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a
broadband network environment.
Rear of the TV
•
If you do not have any broadband network services, please consult your retailer for assistance.
•
For more information of the network connections (p. 59)
Select [Wired] or [Wireless]
2
Network Setup
Select Wired or Wireless
Wired
Wireless
Start the settings
3
■
[Wired]
Select [Auto]
Acquire IP Address
Auto
select
access
•
To set manually, select [Manual] and set
each item. For details
Wireless connection
Wireless LAN Adaptor and Extension cable
•
or
Wired connection
LAN cable
Set later
Manual
(p. 61 - 62)
"Optional accessories" (p. 8)
Connect to the USB 1, 2 or 3 port.
select
access
Connection Test
Check network cable connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
Automatically setup is done and the test of the
network connection starts.
: succeeded
The test is successful and the TV is
connected to the network.
: failed
Check the settings and connections, and
then select [Retry]
Internet
environment
Access point
Internet
environment
15
Advertisement
Table of Contents
