Error Codes - Westinghouse WTB5400 User Manual

ERROR CODES & ALARMS
Alarms
ALARM ICON
Non I&W
Non I&W

Error codes

ERROR CODE
Communication Error
Sensor – Open Circuit /
Short Circuit
Ice cube tray water fill not detected This error indicates that when an ice harvest
TIPS & INFORMATION
WHAT IT MEANS
Freezer Temperature Alarm
Activates if the freezer temperature is 10°c
over set temperature for a period of 50
minutes (except during a defrost).
An alarm will sound the temperature icons
will flash.
Door Alarm
Activates if the refrigerator or freezer
doors are left open for longer than 2
minutes.
An alarm will sound and the affected
compartment icon will flash and the
temperature and icons will fade on and off.
WHAT IT MEANS...
If you see this icon displayed (Ice & Water
model) or the top temperature icon is flashing it
means that the control has lost contact with the
main control board.
The appliance will operate at its last known
setting, all auxiliary functions will not work.
If you see this icon displayed (Ice & Water
model) or any combination of the second and
fourth temperature icons are flashing it means
that an error has been detected on a sensor.
The refrigerator will run in a default cycle to
prevent food spoilage.
occurred and a tray water fill was attempted,
that the tray sensor did not get above 0°C.
OPERATION
• To deactivate the alarm for 50 minutes
press any button.
• To deactivate alarm for 12 hrs on the ice &
water model press and hold Select Mode
for 10 seconds for non ice and water
models press and hold any button for 10
seconds.
• Alarm will sound and icon will flash
indicating which door is open.
(Ice & water models)
• To silence the alarm for 8 minutes while
the door is open press any button (the
icons will continue to flash until door is
closed).
WHAT TO DO...
Turn the unit off at the power point for
5 minutes and then turn it back on.
Under most circumstances this will reset
the display enabling normal function to
continue.
If the error re-occurs then call
for service.
Call for service.
Check the following:
Water turned on at tap, water filter not
blocked, no kinks in water tube.
If after checking these items and they do
not appear to be the cause of the error,
call for service.
ERROR CODES & ALARMS 25