ATEN Altusen KH1516A User Manual page 47

Setting
SET Sets the keyboard language layout for the computers attached to each
KEYBOARD port. Press [Spacebar] to cycle through the choices: The default is
LANGUAGE English (US).
FIRMWARE In order to upgrade the KH1508A / KH1516A / KH1532A and adapter
UPGRADE cable firmware (see The Firmware Upgrade Utility, page 53) you must
first enable Firmware Upgrade mode with this setting.
When you bring up this menu, the current firmware version levels
display. Select Y to enable Firmware Upgrade mode, or N to leave this
menu without enabling it.
ADAPTER This function allows the administrator to check the firmware version of
UPGRADE the KVM adapter cable. When you bring up this menu, the current
firmware version levels display. See FIRMWARE UPGRADE, above,
also.
SET LOGIN This function allows the administrator to request users to login or not.
MODE When the login dialog box is disabled, the system disables the login/
logout function. If the system is re-started, the login/logout function
remains disabled.
SET VIDEO This setting selects the video mode (separate or composite video sync
HV MODE signals) the port(s) (internal/external) is using. Press [Enter] to enter
this setting and see a list of ports. In the list, the "Mode" column will
display the video mode choices, these are:
S Separate (default)
C Composite
Use the [Spacebar] to cycle through the choices. Changes will not
be saved until you exit to the main menu.
Note: Some old adapters may not support HV mode and the "Mode"
column will be empty.
Chapter 4. OSD Operation
Function
35