How To Use This Volume "Operating Procedures - Kenwood K-501USB-B Read Before Use

How to Use This Volume "Operating Procedures"

USB audio player
connected to the
USB connector
Kenwood digital audio
player connected to the
D.AUDIO IN connector
Preparations before operation
* Correc t operation may not
be possible without correct
preparations.
* The section "Preparations" does not
mention how to load a CD, insert
a memory card or connect the
system components. For details,
refer to "Connections" on page 8
or "Basic Operation" on page 24.
* Certain pages show the specific
preparation procedures in place of
the illustration below showing the
remote control unit and main unit.
Keys for use in operation from
the remote control unit
* Certain pages do not show
this illustration.
Keys for use in operation from
the main unit
* Certain pages do not show
this illustration.
22
English
Operation-target audio sources
Memory card
inserted in the
main unit
Radio
Recording Music from Kenwood Digital Audio
Player
Memory card only
Prepar ati on s
Connect a Kenwood digital audio player
to the D.AUDIO IN connector. (Refer to
page 10 of "Read Before Use".)
Make sure that the memory card is in
stop mode.
If is lit,
press the RANDOM key to cancel the
random play mode.
* Do not connect a USB audio player during
recording, as this will stop the recording.
* To change the record mode setup,
see pages 56 to 61.
32
CD
Auxiliary component
connected to the AUX
IN connector
1
Select the D.AUDIO source.
2
Prepare recording.
Let playback pause
1
temporarily.
2 Select the music fi le to be recorded.
* Playback pauses at the beginning of the selected music fi le.
* When the dedicated cable is used, the Kenwood digital
audio player can be controlled from the main unit or
remote control unit.
* If the dedicated cable is not used for the connection,
prepare recording on the connected Kenwood digital
audio player.
3
Enter record-pause mode.
The memory card is put
to record-pause mode.
* A message [Don't remove
MEMORY CARD] is scrolled.
To stop recording To let recording pause
temporarily
* To resume recording, press the
same key again. Note that a new
music fi le is created at this time.
or