Table of Contents
Advertisement
Setting items
Blanking
Description
Tips
• When you select "V Stretch" or "Squeeze," select the anamorphic lens
type from "Anamorphic Lens" in the Installation
• Selectable aspect modes vary depending on the input signal (page 57).
• The aspect cannot be selected for an input signal from a computer, or
an input signal with a resolution of 4096 × 2160 (pages 52, 53, 57).
This feature allows you to adjust the displayable region within the four
directions of the screen.
On: Select the edge to adjust by highlighting Left, Right, Top, or Bottom
using the M/m buttons.
Adjust the amount of blanking using the </, buttons.
Off: Turns off the Blanking function.
Tip
Depending on the aspect ratio setting, right/left blanking may not be
available.
28
menu.
Advertisement
Table of Contents
