Searching For A Device Code; Locking The Volume Keys; Clearing The Remote's Programming; Resetting To The Factory Default - Toshiba 24SL415U Owner's Manual

Searching for a device code

If you do not know the device code for a particular
device, you can view each available code for that de-
vice mode and sample the functions to find the code
that operates the target device.
1無
Press a mode select button on the remote.
2無
While holding down
remote control enters program mode.
3無
Point the remote at the target device and press
, 1, , , or
to change a code.
4無
If the device responds to the remote control: Press
, to store the device code. The remote exits
program mode.
5無
If the device does not respond to the remote control:
Repeat this step until the device responds to the remote.
When no code is found, exit the program mode by
the following operation:
• Press . (current state is stored)
• Press no key for 10 seconds. (current state is
not stored)
Note: When a search cycle is completed, the remote
displays each available code again. If no key is
pressed within 10 seconds, the remote exits program
mode and returns to the previous code.

Locking the volume keys

By default, the remote's volume keys (
MUTE) are locked to the TV device mode.
State Meaning
The remote operates the TV's
volume except the AUX mode,
Locked (default)
even when the TV is not the cur-
rent device mode.
The remote operates the volume
of the device associated with
the current device mode. Each
Unlocked
device mode has its own volume
(if the device ID has volume
data).
The remote operates the volume
of the device associated with
the locked mode, even when the
Locked to a specific
locked mode is not the current
device mode
device mode.
Note: The AUX mode is not
locked to other device modes.
80
Chapter 10: Appendix
, press 8, 5, 0, 0. The
, and then press p or q
, , and
See "Operating other devices" (
To lock the remote's volume keys to a specific mode:
Example: CABLE/SAT mode
1無
Press CABLE/SAT.
2無
While holding down
3無
Press . (locked).
The remote's volume keys now operate the
volume of the device associated with the CABLE/
SAT mode, even when CABLE/SAT is not the
current device mode.
To unlock the remote's volume keys:
1無
While holding down
2無
Press . The CABLE/SAT mode is unlocked.

Clearing the remote's programming

You can clear all programmed remote control fea-
tures not related to "Device code setup" and reset the
volume lock to the TV device mode.
While holding down

Resetting to the factory default

You can clear changed manufacturing features.
While holding down

page 79).
, press 8, 0, 0, 0.
, press 8, 0, 0, 0.
, press 8, 9, 0, 0.
, press 8, 9, 0, 1.