Chapter 6: Basic Features; Tuning Channels; Setting The Channel Tuning Mode; Tuning In To The Next Programmed Channel - Toshiba 24SL415U Owner's Manual

Tuning channels

Setting the Channel Tuning Mode

You can select how tuning is handled for analog and
digital channels when the TV is in Antenna mode.
Note: To use this feature, ANT/CABLE In must
be set to Antenna ( page 29).
1無
> Settings > SETUP > TV Settings >
2無
Press p or q to highlight Channel Tuning Mode.
Mode Description
You can tune both analog and
Standard
digital channels normally.
Digital channels have priority
when manually entering a channel
Auto
number using the 0-9 buttons
(default)
on the remote. To tune analog
channels, use
You can only tune digital
Digital
channels.
3無
Press t or u to select a mode. Press
Note: The Channel Options screen and the Channel
Browser ANT/CABLE List are updated when you
change the mode. The History List is cleared, but the
Favorites List is saved.
Tuning in to the next programmed
channel
Press or on the remote control or TV control
panel.
Note: This feature does not work unless you store
channels in the TV's channel memory ( page 29).
Tuning in to a specific channel
(programmed or unprogrammed)
Channel Description
Use the 0–9 buttons on the remote
Analog control. (For example, to select
channel 125, press 1, 2, 5.) Press
Use the 0–9 buttons on the remote
control to enter the major channel
number. Press the dash (
Digital
Enter the sub-channel number. (For
example, to select digital channel
125- 1, press 1, 2, 5, –, 1.) Press

Chapter 6: Basic features

.
/ if available.
.
.
) button.
.

Using the Channel Browser

The Channel Browser is a helpful navigational
™
interface for all of your channels and inputs.
Features:
• Navigate the contents of all of your inputs.
• Keep a list of your favorite channels.
• Keep a history of the last 32 channels or inputs
viewed.
• Quickly surf and tune to your recently viewed
channels/inputs from the Channel Browser™
History List.
• Surf via Browse mode (to immediately tune to
channels as you highlight them in the Channel
Browser ) or Select mode (to surf channels in the
™
Channel Browser before you select one to tune to).
™
• Quickly change inputs from the Inputs List.
• Quickly select HDMI ®
HDMI-CEC List.
To set up the Channel Browser
1無
> Settings > PREFERENCES > Channel
Browser Setup >
.
2無
Press p or q to highlight Navigation.
3無
Press t or u to select Select Mode or Browse
Mode.
4無
Select a list.
• History List
• ANT/CABLE List
• Inputs List
• Favorites List
• HDMI-CEC List
Note:
• The History List will be cleared every time the
TV is powered off.
• The HDMI-CEC Control List is not available
when Enable HDMI-CEC Control is set to
Off ( page 40).
5無
Select On or Off.
6無
To return to factory defaults, highlight Reset and
press .
To open the Channel Browser
> APPLICATIONS > Channel Browser >
•
• Press
or .
™
CEC devices from the
:
™
:
™
.
33