Brother MFC-J775DW Basic User's Manual page 65

3
Pull the two green levers inside the
machine to release the jammed paper.
4
Place both hands under the plastic tabs
on both sides of the machine to lift the
scanner cover (1) into the open position.
5
Slowly pull the jammed paper (1) out of
the machine.
IMPORTANT
• DO NOT touch the encoder strip, a thin
strip of plastic that stretches across the
width of the machine (1). Doing this may
cause damage to the machine.
• If the print head is in the right corner as
shown in the illustration (2), you cannot
move it. Follow these steps:
a. Close the scanner cover, and then
1
b. Open the scanner cover again, and
c. Unplug the machine from the power
1
• If the paper is jammed under the print
head, unplug the machine from the power
1
reconnect the power cord.
then hold down the Stop/Exit button
until the print head moves to the center.
source and remove the jammed paper.
2
3
51