Installing The Network Scanner Tool - Sharp PN-L601B Software Manual

Installing the Network Scanner Tool

The Network Scanner Tool is used to acquire an image from a SHARP multifunction machine connected to the same network.
n Installing the Network Scanner Tool
The Network Scanner Tool is not included on the provided CD-ROM. Use the Network Scanner Tool (Version 3.3 or later) that is
provided with the multifunction machine. (If already installed, there is no need to reinstall.)
For details on installing and using the Network Scanner Tool, see the Network Scanner Tool user's guide. For questions
on the compatibility of your multifunction machine or the Network Scanner Tool, contact your dealer or authorized service
representative.
n Configuring settings for the Network Scanner Tool
The folder that will be used to acquire images scanned from the multifunction machine must be stored as a destination in
the multifunction machine's address book. When creating a profile, select "Move File to Folder"and set the folder (below) for
acquiring images in "Details".
• Windows Vista/7:
Startup drive:\ProgramData\SHARP\PenSoftware\JPEG
• Windows XP:
Startup drive:\Documents and Settings\All Users\Application Data\SHARP\PenSoftware\JPEG
n Uninstalling
Exit the Network Scanner Tool from the taskbar, open the uninstall screen as explained on page 22, and remove "Network
Scanner Tool" (or "Sharpdesk").
23
E