Erasing A Drawn Line - Sharp PN-L601B Software Manual

Erasing a drawn line

1. Touch the "Eraser" button.
2. With the pen touching the screen, move the pen.
The part you move over is erased.
TIPS
• You can switch through "Pen 1" to "Pen 3" and "Eraser" by repeatedly pressing Function Button 2 of the touch pen.
To change functions using Function Button 2, select the touch panel driver "Properties", and set "Function Button 2" to "Pen
Software Link" on the "OPERATION SETTING" tab.
• The eraser function can erase only the objects drawn with the pen function. You cannot use the "Eraser" button to erase
pasted images. You cannot use it either to erase the edges of a line to make the line thinner. Even if you erase the edges
only, the entire width of the line will be erased.
• An object drawn with the pen function cannot be erased if it is part of a group.
• When "Auto Pen/Eraser Mode Switching" is enabled (page 20), you can erase with the eraser or your finger when one of
"Pen 1" to "Pen 3" or "Eraser" is selected. Touch the screen with the eraser or your finger, and after the cursor changes to the
eraser, move the eraser or your finger. You can set the eraser size for erasing with the eraser or your finger to the touched
area of the screen, or to the size selected on the palette.
When "The area you touch (or cover)"
• With Windows Vista/7, the display changes as follows when the "Eraser" button is selected in the overlay mode. The display
returns to normal when the function other than the "Eraser" button is selected.
- The computer screen in the background is hidden even by translucent objects.
- An object is surrounded with a white line.
n Changing the eraser size
The size of the eraser can be changed by selecting it from the palette for the "Eraser" button.
To display the palette, touch the
TIPS
• The method of closing the palette can be changed. (Page 20)
is selected
"Eraser" button again while it is in the selected state.
When "The selected size in Eraser
Palette" is selected
11
E