DUROMAX DuroStar DS4850EH User Manual page 13

6.
Connect propane tank
The propane hose is located on the left side of the regulator,
below the OHV valve cover. Screw the open ACME nut
connection to your propane tank and turn the tank on.
7.
Release propane pressure
The propane regulator / decompression valve is located
on the frame of the generator below the OHV valve cover.
Press the button in the center down 3-5 times for one
second to clear the air from the lines and fill the carburetor.
8.
Adjust choke
The choke lever is located above the air filter to the right
of the recoil start. Slide the lever to the right to open the
choke and increase air into the carburetor for normal
running.
9.
Start
The key switch is located on the left side of the front power
panel. Insert the key and turn to the start position to start
the generator. Allow the key to return to the run position
once started.
10.
Turn breaker on / connect
The breaker is located on the right side of the front power
panel. Flip the breaker up to allow power to flow to the
receptacles. Connect your devices to the receptacles on
the front panel. Start with the largest loads first.
13