Introduction - Jet ELITE EVBS-26 Operating Instructions And Parts Manual

33. Adjust upper guide to clear workpiece. Hold workpiece fi rmly against table.
34. Direction of feed — feed work into a blade or cutter against the direction of rotation of the blade or cutter only.
35. Installation work and electrical wiring must be done by qualifi ed electrician in accordance with all applicable codes and
standards.
36. Do not remove jammed pieces until blade has stopped.
WARNING: This product can expose you to chemicals including lead which is known to the State of California to
cause cancer and birth defects or other reproductive harm. For more information go to http://www.p65warnings.ca.gov.
WARNING: Some dust, fumes and gases created by power sanding, sawing, grinding, drilling, welding and other
construction activities contain chemicals known to the State of California to cause cancer and birth defects or other
reproductive harm. Some examples of these chemicals are:
• lead from lead based paint
• crystalline silica from bricks, cement and other masonry products
• arsenic and chromium from chemically treated lumber
Your risk of exposure varies, depending on how often you do this type of work. To reduce your exposure to these
chemicals, work in a well-ventilated area and work with approved safety equipment, such as dust masks that are
specifi cally designed to fi lter out microscopic particles. For more information go to http://www.p65warnings.ca.gov/ and
http://www.p65warnings.ca.gov/wood.
Familiarize yourself with the following safety notices used in this manual:
!
This means that if precautions are not heeded, it
may result in minor injury and/or possible machine
damage.

4.0 INTRODUCTION

This manual is provided by JET
This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instruc-
tions and parts breakdown. Your machine has been designed and constructed to provide years of trouble-free operation if
used in accordance with the instructions as set forth in this document.
If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our web site:
www.jettools.com. Retain this manual for future reference. If the machine transfers ownership, the manual should accom-
pany it.
6
®
covering the safe operation and maintenance procedures for a JET Model EVBS-26.
!
This means that if precautions are not heeded, it
may result in serious or even fatal injury.
Vertical Band Saw