Install The Evercharge; Standby Power System (Optional) - Chamberlain LiftMaster Elite Security+ 3800PC Owner's Manual

Installation
8

Install the EverCharge

(optional)
®
If the optional EverCharge
installed at this time. The SPS can be mounted to either the ceiling or a wall within 3 feet
(.9 m) of the garage door opener.
Position the SPS on a structural support (ceiling joist or wall stud).
1
2 Attach the SPS to the support with the 1-1/2 inch lag screws (2) provided. There are
mounting holes on either side of the SPS.
3
Connect the SPS cord into the connector on the bottom of the garage door opener.
Follow all instructions included with the EverCharge
4
for proper operation.
EverCharge ® Standby
Power System
®
Standby Power System (SPS)
Standby Power System is part of this installation it should be
® Standby Power System to test
Connector
Wall Anchor
SPU Cord
14