Calls Settings; Security Settings - Zte Z223 User Manual

Calls Settings

Call forwarding
Call forwarding allows you to divert your incoming calls to another phone number. Contact your service
provider for more information and availability.
Call Waiting
If a call comes in when you are already on a call, you are notified with a call waiting tone. The phone
shows the number/name of the waiting call. Contact your service provider for more information.
Send My Number
This function allows you to send or hide your phone number when making calls. You can also select Set
by network. The network then chooses whether to show/hide the phone number. This function requires
network support.
Open Flip to Answer
This function allows you to answer an incoming call by directly opening the flip, but without pressing the
Send Key or OK Key.
Any Key to Answer
This function allows you to answer an incoming call by pressing any key on the keypad, without
limitation to the Send Key or OK Key.

Security Settings

Phone Password
A password can protect your phone and help avoid illegal use. If your phone is password protected, you
will have to enter the correct password when the phone is turned on.
 For a newphone, the protection function is not activated by default, and the default password is
0000.
 From idle mode, selectMenu > Settings > Security > Activate security codes > Phone lock code to
start or stop password protection.
 From idle mode, select Menu > Settings > Security > Change security codes > Phone lock code to
change the phone's password. It is suggested that you change the password to something you will
easily remember.
Notes:
Please remember the password you set. Without it your phone cannot be used normally and you will
need to contact your service provider to unlock it.
Contact your service provider for more information.
PIN Codes
A PIN code is the personal identification code used by the SIM card. Its purpose is to avoid illegal use of
your SIM card. The correct PIN code should be entered when the new phone is first turned on, otherwise
the phone will only be able to make emergency calls.
 For a new card, the default code is supplied by the service provider.
 From idle mode, select Menu > Settings > Security > Activate security codes > PIN code to enable
or disable the PIN code.
 From idle mode, select Menu > Settings > Security > Change security codes > PIN code to change
the PIN code.
 If you enter the wrong PIN code three times in a row, the phone will lock the SIM card and prompt
you to enter a PUK code to unlock it.
Notes:
If you change the PIN code, please remember the new number.
PIN2 is needed for some settings. Use the same procedure as for the PIN code.
PUK Codes
A PUK code is the unlock code for the SIM card. When the SIM card is locked, you have to enter the
correct PUK code and then enter the new PIN code. The SIM card can then be used normally.
 A PUK code may be supplied with a new card. Contact your service provider for more
26 Confidential and Proprietary Information of ZTE CORPORATION
Z221 User Manual