Table of Contents
Advertisement
PRO:CENTRIC
(Except for UV34**)
1
Use the
button to select the PRO:CENTRIC.
Mode
- Sets whether or not enable Pro:Centric and the service method .
- You can set to Off, Configuration Only, Flash(Except for Iran), GEM or HTML using the
Off; when it is set to Off, all the sub items are disabled. (Except for WORF, Room Number Setting)
WORF
- Press the 'OK' button in 'WORF Setting' item to go to the 'WORF' menu.
- When WORF is set to 'On' , Hour and Minute items are enabled and then the WORF function is enabled.
- When WORF is set to 'Off' , 'Hour' and 'Minute' items are disabled and then the WORF function is disabled.
Media Type
- Sets the Meium type to RF or IP.
The default value is RF.
RFF
• Data Channel Freq(KHz)
- Sets the RF frequency at which the Pro:Centric data is received.
• Data Channel Type
- Sets the RF modulation type to DVB-T or DVB-C.
The default value is DVB-C.
25
INSTALLATION MENU
button . The default value is
Advertisement
Table of Contents
