LG UV34** Owner's Manual
LG UV34** Owner's Manual

LG UV34** Owner's Manual

Led tv
Hide thumbs Also See for UV34**:

Advertisement

: Depending on model / Závisí na modelu / En función del modelo / selon le modèle / Abhängig vom Modell / Ανάλογα με το
www.lg.com
μοντέλο / In base al modello / Zależnie od modelu / Dependendo do modelo / В зависимости от модели /
bağlı olarak değişkenlik gösterebilir / Залежно від моделі
AAA
a
b
65UV34**
e
f
75UV34**
c
X 4
(M5 X L20)
65UV34**
g
X 4
(M5 X L12)
75UV34**
LED TV
UV34**
d
X 4
(M4 X L20)
65UV34**
h
X 4
(M4 X L20)
75UV34**
/ Modele

Advertisement

Table of Contents
loading

Summary of Contents for LG UV34**

  • Page 1 : Depending on model / Závisí na modelu / En función del modelo / selon le modèle / Abhängig vom Modell / Ανάλογα με το www.lg.com μοντέλο / In base al modello / Zależnie od modelu / Dependendo do modelo / В зависимости от модели / / Modele bağlı...
  • Page 3 65UV34**...
  • Page 4 75UV34**...
  • Page 5 75UV34**...
  • Page 6 ANTENNA/ CABLE IN HDMI IN HDMI IN/ARC USB IN H/P OUT CLOCK...
  • Page 7 Satellite IN OPTICAL DIGITAL AUDIO OUT...
  • Page 10 65UV341C-ZC 1456 335.9 64.8 27.6 26.0 75UV341C-ZC 1697 1038 367.5 65.3 44.3 41.3 AC 100-240 V ~ 50 /60 Hz Power requirement...
  • Page 11 OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com...
  • Page 12: Safety Instructions

    Safety instructions Please read these safety precautions carefully before using the product. Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on WARNING earth.) Otherwise possibility you may be electrocuted or injured. Do not place the TV and/or remote control in the following Insert power cable plug completely into wall socket otherwise if not environments:...
  • Page 13 Do not drop the product or let it fall over when connecting external Do not drop metallic objects such as coins, hair pins, chopsticks or wire devices. Otherwise, this may result in injury or damage to the product. into the product, or inflammable objects such as paper and matches. Children must pay particular attention.
  • Page 14 Only use an authorized AC adapter and power cord approved by If you install the TV on a stand, you need to take actions to prevent the LG Electronics. Otherwise, this may result in fire, electric shock, product from overturning. Otherwise, the product may fall over, which malfunction or product deformation.
  • Page 15 When installing the antenna, consult with a qualified service When connecting external devices such as video game consoles, make technician. If not installed by a qualified technician, this may create a sure the connecting cables are long enough. Otherwise, the product fire hazard or an electric shock hazard.
  • Page 16 Protect the power cord from physical or mechanical abuse, such as When moving the product, make sure you turn the power off first. Then, being twisted, kinked, pinched, closed in a door, or walked upon. Pay unplug the power cables, antenna cables and all connecting cables. particular attention to plugs, wall outlets, and the point where the cord The TV set or power cord may be damaged, which may create a fire exits the appliance.
  • Page 17: Viewing 3D Imaging (Only 3D Models)

    •  If you watch a 3D video for a long time, you may experience eye period of time. fatigue. In this case, stop watching the 3D video and take a rest. •  Only use LG 3D glasses. Otherwise, you may not be able to view 3D Generated Sound videos properly.
  • Page 18: Separate Purchase

    Preparing CAUTION •  Do not use any unapproved items to ensure the safety and product life span. NOTE •  Any damage or injuries caused by using unapproved items are not covered by the warranty. •  If the TV is turned on for the first time after it was shipped from the • ...
  • Page 19: Lifting And Moving The Tv

    Lifting and moving the TV Using the button Please note the following advice to prevent the TV from being scratched (Depending on model) or damaged and for safe transportation regardless of its type and size. You can simply operate the TV functions, using the button. • ...
  • Page 20: Attaching The Tv To A Desk

    Attaching the TV to a desk <B type> Power On (Press) (This feature is not available for all models.) Power Off (Press and Hold) The TV should be attached to a desk so it cannot be pulled in a forward/ Menu Control (Press backward direction, potentially causing injury or damaging the product.
  • Page 21: Using The Kensington Security System

    We recommend the use 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with of the TV.
  • Page 22: Separate Purchase(Wall Mounting Bracket)

    Separate purchase(Wall Mounting Bracket) NOTE •  When installing the wall mounting bracket, use the adhesive label 43UW76** 49/55UW76** or protective cover provided. The adhesive label or protective cover Model 32/43LW64** 49/55UW96** will protect the opening from accumulating dust and dirt. (Only 43UW95** when the label or cover is provided) VESA (A x B) (mm) 200 x 200...
  • Page 23: Connections (Notifications)

    Connections (notifications) Antenna connection Connect the TV to a wall antenna socket with an RF cable (75 Ω). •  Use a signal splitter to use more than 2 TVs. Connect various external devices to the TV and switch input modes to • ...
  • Page 24: Speaker Output Setup

    Speaker Output Setup Network Setup (Depending on model) Wired network connection (Depending on model) This TV can be connected to a Pro:Centric server via the LAN port. After making the physical connection, the TV needs to be set up for network communication.
  • Page 25: Other Connections

    Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided. General HDMI ULTRA HD Deep •  Colour - On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0) - Off : Support 4K @ 50/60 Hz 8 bit (4:2:0) If the device connected to Input Port also supports ULTRA HD Deep Colour, your picture may be clearer.
  • Page 26: Open Source Software Notice Information

    / By pressing the AD button, audio descriptions function will be LG Electronics will also provide open source code to you on CD-ROM enabled. (depending on model) for a charge covering the cost of performing such distribution (such / Sets the alarm function.
  • Page 27: Troubleshooting

    Troubleshooting Specifications The software version can be updated for improvement in performance. Wireless module specification Customer needs to ensure the compatibility of customer’s equipment •  As band channels can vary per country, the user cannot change or with LGE software. If needed, please consult with LGE and upload adjust the operating frequency.
  • Page 28: Operating Humidity

    CI Module (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Environment condition Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % (Depending on country) Digital TV Analogue TV...
  • Page 29 HDMI-DTV supported mode HDMI-PC supported Mode •  PC audio is not supported Horizontal Vertical Resolution •  Use HDMI IN 1 for PC mode (Depending on model) Frequency (kHz) Frequency (Hz) Horizontal Vertical Frequency 31.47 59.94 Resolution 720 x 480 Frequency (kHz) (Hz) 31.50 60.00...
  • Page 30 3D supported mode (Only 3D models) •  Video, which is input as below media contents is switched into the 3D screen automatically. The method for 3D digital broadcast may differ depending on the signal environment. If video is not switched automatically into 3D, manually convert the settings to view 3D images. For models supporting Miracast / Intel®...
  • Page 31 3D supported mode manually Signal Input Playable 3D video format Horizontal Vertical Resolution Frequency (kHz) Frequency (Hz) 1024 x 768 48.36 60.00 1920 x 1080 67.50 54.00 24.00 3840 x 2160 56.25 25.00 HDMI-PC 2D to 3D, 67.50 30.00 Side by Side(half), Top & Bottom 4096 x 2160 54.00 24.00...
  • Page 32 3D supported mode manually Signal Input Playable 3D video format Horizontal Vertical Resolution Frequency (kHz) Frequency (Hz) 37.50 50.00 1280 x 720 45.00 60.00 44.96 59.94 33.75 60.00 1920 x 1080i 33.72 59.94 28.12 50.00 67.50 60.00 2D to 3D, Component Side by Side(half), Top &...
  • Page 33: Photo Format

    Photo format Video codec File Extension Codec Format Resolution Format VC-1 Advanced Profile (WMVA Minimum: 64 (W) x 64 (H) .jpeg, .jpg, Video excluded), VC-1 Simple and Main JPEG Maximum: 15,360 (W) x 8,640 (H) / .asf .jpe Profiles Progressive Type: 1,920 (W) x 1,440 (H) .wmv WMA Standard (WMA v1/WMA Speech Minimum: 64 (W) x 64 (H)
  • Page 34 IR CODES •  This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) Remote control Button Remote control Button (POWER)  Remote control Button (Power On/Off) Remote control Button Remote control Button Remote control Button   Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button  /  Remote control Button 10-19  Number Key 0-9 Remote control Button 8F  Remote control Button Remote control Button   Remote control Button Remote control Button Remote control Button    Remote control Button Remote control Button   ...
  • Page 35: External Control Device Setup

    EXTERNAL CONTROL DEVICE Type of Connector : D-Sub 9-Pin Male SETUP RS-232C Setup •  Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control  device (such as a computer or an A/V control system) to control the  product’s functions externally. Pin name Connect the serial port of the control device to the RS-232C jack on the  product back panel. 3.5 V RXD (Receive data) •  RS-232C connection cables are not supplied with the product. TXD (Transmit data) IR OUT from TV GND  No Connection No Connection (5 V available in some models) No Connection No Connection (12 V available in some models) RS-232C IN (CONTROL & SERVICE) (*Not Provided)
  • Page 36: Communication Parameters

    RS-232C Configurations Command Reference List (Depending on model) 7-Wire Configurations (Standard RS-232C cable) DATA COMMAND1 COMMAND2 (Hexadecimal)     PC  01. Power 00 to 01      2  3  02. Aspect Ratio (See p. 4)     3  2  03. Screen Mute (See p. 5)     5  5  04. Volume      4  6 ...
  • Page 37: Transmission / Receiving Protocol

    Transmission / Receiving Protocol 01.  Power (Command: k a) ►To control Power On/Off of the set.   (Depending on Model) Transmission [k][a][  ][Set ID][  ][Data][Cr] Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] Data 00 : Power Off  01 : Power On [Command 1] : First command to control the TV. (j, k, m or x) [a][ ][Set ID][ ][OK/NG][Data][x] [Command 2] : Second command to control the TV. ►To Show TV is Power On/Off.   [Set ID] : You can adjust the set ID to choose desired monitor ID number  in option menu. Adjustment range is 1 to 99. When selecting Set ID  Transmission ‘0’ ,  every connected set is controlled. Set ID is indicated as decimal (1  [k][a][ ][Set ID][ ][FF][Cr] to 99) on menu and as Hexa decimal (0 x 0 to 0 x 63) on transmission/ receiving protocol. [Data] : To transmit command data. Transmit  ‘ FF’ data to read status of  [a][ ][Set ID][ ][OK/NG][Data][x] command. [Cr] : Carriage Return *  Similarly, if other functions transmit ‘0 x FF’ data based on this for- mat, Acknowledgement data feed back presents status about each ...
  • Page 38 03.  Screen Mute (Command: k d) 05.  Volume Control (Command: k f) ►To select screen mute on/off. ►To adjust volume.     ►You can also adjust volume with the volume buttons on remote    Transmission control. [k][d][ ][Set ID][ ][Data][Cr] Transmission [k][f][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) Video mute off Data Min : 00 to Max : 64           01 : Screen mute on (Picture off) *  Refer to Real data mapping           10 : Video mute on [f][ ][Set ID][ ][OK/NG][Data][x] [d][ ][Set ID][ ][OK/NG][Data][x] *  In case of video mute on only, TV will display On Screen Display(OSD).  06.  Contrast (Command: k g) But, in case of Screen mute on, TV will not display OSD. ►To adjust screen contrast.   You can also adjust contrast in the PICTURE menu. 04.  Volume Mute (Command: k e) ►To control volume mute on/off. Transmission   You can also adjust mute using the MUTE button on remote control. [k][g][ ][Set ID][ ][Data][Cr] Transmission Data Min : 00 to Max : 64 [k][e][ ][Set ID][ ][Data][Cr] * ...
  • Page 39 08.  Colour (Command: k i) 12.  Remote Control Lock Mode (Command: k m) ►To adjust the screen Colour. ►To lock the front panel controls on the monitor and remote control.     You can also adjust colour in the PICTURE menu. Transmission [k][m][ ][Set ID][ ][Data][Cr] Transmission [k][i][ ][Set ID][ ][Data][Cr] Data 00 : Lock off 01 : Lock on Data Min : 00 to Max : 64 *  Refer to Real data mapping [m][ ][Set ID][ ][OK/NG][Data][x] [i][ ][Set ID][ ][OK/NG][Data][x] *  If you are not using the remote control, use this mode. When main  power is on/off, external control lock is released. *  In the standby mode, if key lock is on, TV will not turn on by power  09.  Tint (Command: k j) on key of IR & Local Key. ►To adjust the screen tint.   You can also adjust tint in the PICTURE menu. 13.  Balance (Command: k t) Transmission ►To adjust balance.   [k][j][ ][Set ID][ ][Data][Cr] You can also adjust balance in the AUDIO menu. Data Red : 00 to Green : 64 *  Refer to Real data mapping Transmission [k][t][ ][Set ID][ ][Data][Cr] Data L : 00 to R : 64...
  • Page 40: Power Saving Function

    15.  Energy Saving (Command: j q) 17.  Equalize (Command : j v) ►To reduce the power consumption of the TV. You can also adjust  ►To adjust equalize.     Energy Saving in PICTURE menu. Transmission Transmission [j][v][ ][Set ID][ ][Data][Cr] [j][q][ ][Set ID][ ][Data][Cr] Power Saving MSB                                                                                                                    LSB Level Function Description Data Low  Frequency Power 7 6 5 Frequency 4 3 2 1 0 Step Low  Minimum Power 0 0 0 1st Band 0 0 0 0 0 0(decimal) Low ...
  • Page 41: External Input

    Channel data range 22.  Input select (Command: x b) Min : 00 Max : 270F (0 to 9999) (Main Picture Input) ►To select input source for main picture.   Transmission [a][ ][Set ID][ ][OK/NG][Data][x] [x][b][ ][Set ID][ ][Data][Cr] 19.  Programme Add/Skip (Command: m b) Data   Structure ►To set skip status for the current Programme.   MSB                                                                                                                     LSB Transmission [m][b][ ][Set ID][ ][Data][Cr] External Input Input Number Data 00 : Skip 01 : Add External Input Data [b][ ][Set ID][ ][OK/NG][Data][x] Analogue 20.  Key (Command: m c) Component ►To send IR remote key code.   Transmission [m][c][ ][Set ID][ ][Data][Cr] HDMI Data  IR CODES [c][ ][Set ID][ ][OK/NG][Data][x] Input Number Data Input1 21. ...
  • Page 42 *  Real data mapping 00 : Step 0 A : Step 10 (Set ID 10) F : Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100   6E : Step 110 73 : Step 115 74 : Step 116 CF : Step 199 FE : Step 254 FF : Step 255...

Table of Contents