Table of Contents
Advertisement
USB transfer time-out
The time-out value for Control, Bulk and Interrupt transfers.
20 sec / 10 sec / 5 sec / 1 sec
Device reset time-out
USB mass storage device Start Unit command time-out.
20 sec / 10 sec / 30 sec / 40 sec
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
Controller. AUTO uses default value: for a Root port it is 100 ms, for a Hub port the
delay is taken from Hub descriptor.
Auto / Manual
Mass Storage Devices:
AMI Virtual Device Name
Mass storage device emulation type. 'AUTO' emuerates devices according to their
media format. Optical drives are emulated as 'CDROM', drives with no media will be
emulated.
Auto / Floppy / Forced FDD / Hard Disk / CD-ROM
62
http://www.tyan.com
Advertisement
Table of Contents
