Ram3 Cmp30 Remote Mic Operation; Remote Mic Controls - Standard Horizon MATRIX Series Owner's Manual

15 RAM3 CMP30 REMOTE MIC OPERATION

When the Remote MIC is connected to the GX2000/GX2150, all VHF, DSC,
setup menus, AIS, Waypoint, Compass functions and PA/Fog modes can be
remotely operated. The RAM3 ( CMP30 ) Remote Station Microphone opera-
tion is same as GX2000/GX2150 except the receiver audio volume setting
and squelch level setting. The reason for the same operation is to make the
operation of the radio and RAM3 ( CMP30 ) easy. For specific operation of the
RAM3 ( CMP30 ) review sections in the radio manual. The RAM3 ( CMP30 ) is
supplied with 23 feet (7 m) of routing cable and can be extended up to 70 feet
(21 m) using three 23-foot extension cables model CT-100. The Intercom fea-
ture can be used between the RAM3 ( CMP30 ) and the GX2000/GX2150. In
addition, speaker wires are supplied at the panel mount of the routing cable for
external speakers to be connected in noisy environments.

15.1 REMOTE MIC CONTROLS

KEY
Toggles between high and low power. When the
the transceiver is on CH13 or CH67, the power is temporarily switched
from LO to HI until the PTT switch is released. The
tion on transmit inhibited and low-power only channels.
Page 108
key is pressed while
key does not func-
GX2000/GX2150