Changing The Picture Options - Samsung SyncMaster T27A300 User Manual

Basic Features

Changing the Picture Options

¦
Advanced Settings
O
MENUm → Picture → Advanced Settings →
ENTERE
Advance Settings are available in the Standard and Movie
modes. When connecting a PC, you can only make changes
to Gamma and White Balance. They are not available when
you are watching a digital channel.
To use, select an option using the up and down arrow keys,
and then press ENTERE. Use the arrow keys to change a
value or setting, and then press ENTERE.
Advanced Settings
Black Tone
Dynamic Contrast
Gamma
Color Space
White Balance
Flesh Tone
Edge Enhancement
■ Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
■ Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
■ Gamma: Adjust the primary color intensity.
■ Color Space (Auto / Native): Adjusts the range of
colors (the color gamut) available to create images.
■ White Balance: Adjusts the red, green, and blue
brightness so that the brightest point of a picture
becomes white.
R-Offset / G-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
■ Flesh Tone: Emphasize pink "Flesh Tone."
■ Edge Enhancement (Off / On): Emphasize object
boundaries.
: Off ►
: Medium
: 0
: Native
: 0
: On
U Move E Enter R Return
Picture Options
O
MENUm → Picture → Picture Options →
ENTERE
Select an option using the up and down arrow keys, and
then press ENTERE. Use the arrow keys to change the
setting, and then press ENTERE.
✎
When connecting a PC, you can only make changes to
the Color Tone, Size.
Picture Options
Color Tone
Size
Digital Noise Filter
HDMI Black Level
Film Mode
■ Color Tone (Cool / Normal / Warm1 / Warm2)
✎
Warm1 or Warm2 will be activated when the
picture mode is Movie.
✎
You can adjust and store settings for each external
device you have connected to an input on the TV.
■ Size: If you have a cable box or satellite
receiver, it may have its own set of
screen sizes as well. However, we highly
recommend you use your TV's 16:9 mode
most of the time.
16:9 : Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification.
Cuts off the top and sides.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
✎
Available with HD 1080i / 720p signals in 16:9
mode.
4:3 : Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
: Normal ►
: 16:9
: Auto
: Normal
: Off
U Move E Enter R Return
P.SIZE
23
English