Samsung NX210 User Manual page 161

New! nx210 20.3 megapixel compact system camera nx210 user manual (ver.1.0)
Hide thumbs Also See for NX210:
Table of Contents

Advertisement

Before contacting a service center
Appendix >
Situation
Suggested remedies
This camera can have minute distortion when
using a wide-angle lens that enables shooting
Photos are distorted
with a wide angle of view. This is normal, and
does not cause malfunction.
• Ensure that HDMI cable is properly connected
Playback screen does
not appear on the
to the external monitor.
• Ensure that the memory card is properly
connected external
recorded.
device
• Ensure that the USB cable is connected
Your computer does
correctly.
• Ensure that your camera is switched on.
not recognize your
• Ensure that you are using a supported
camera
operating system.
Your computer
The file transfer may be interrupted by static
disconnects the
electricity. Disconnect the USB cable and
camera while
connect it again.
transferring files
Depending on the software you use, video files
Your computer cannot
may not play. To play video files captured with
play videos
your camera, install and use the Intelli-studio
program on your computer. (p. 141)
• End Intelli-studio and restart the program.
Intelli-studio is not
• You cannot use Intelli-studio on Macintosh
functioning properly
computers.
Situation
Suggested remedies
Cannot set the DPOF
You cannot set the DPOF for RAW files.
for RAW files
• Subject is not in focus. When the subject is
outside the AF area, shoot by moving the
subject inside the AF area and half pressing
[Shutter].
Auto Focus does not
• Subject is too close. Step back from the
work
subject and shoot.
• The focus mode is set to MF. Switch the
mode to AF.
AEL feature does not work in t, M, i,
AEL feature does not
g and s modes. Select another mode to
work
use this feature.
• Ensure that the lens is properly mounted.
• Remove the lens from the camera and
Lens does not work
re-mount it.
External flash or GPS
Ensure that the external device is properly
does not work
mounted and turned on.
• Set the date and time again.
The date & time
• This screen appears when the camera's
settings screen
internal power source is completely
appears when you
discharged. Insert a fully charged battery and
power on the camera
wait at least 72 hours in power off status for
the internal power source to be recharged.
160

Advertisement

Table of Contents
loading

Table of Contents