Connection Using the MINI DP Cable
First make sure that the power cables for product and other devices (e.g. PC, settop box, etc.)
are removed.
MINI DP IN
― S27R75*: To display 2560 x 1440 @ 144 Hz, use a MINI DP cable that supports 2560 x 1440 @ 144 Hz. Make
sure that the graphics card of the MINI DP source supports 2560 x 1440 @ 144 Hz.
― S32R75*: To display 3840 x 2160 @ 60 Hz, use a MINI DP cable that supports 3840 x 2160 @ 60 Hz. Make
sure that the graphics card of the MINI DP source supports 3840 x 2160 @ 60 Hz.
Connecting the Power
1
5
1
Connect the power plug to the AC/DC adapter.
Do not remove the power plug after assembly.
2
Connect the power cable of the Y cable to the DC 19V port on the rear of the product.
3
Connect the power cable of the power adapter, connected to the power plug, to the Y cable which
has been tidied up.
4
Plug the AC/DC adapter into the power outlet.
5
Press the JOG button on the back of the product to turn it on.
― The input voltage is switched automatically.
― In some areas, installation of an additional power plug is not necessary.
2
4
3
25